Samsung washing machines enjoy well-deserved popularity due to their reliability and functionality. However, like any other household appliance, they may encounter certain problems during operation. One of the common complaints of users is the knock that occurs during the spin. This noise may indicate various malfunctions, which must be eliminated in time to avoid serious damage. If you need help repairing a washing machine, gayka.com.ua offers qualified specialists who will help you cope with problems.
Reasons for knocking of the Samsung washing machine during spinning and ways to eliminate them
1. Incorrect installation of the machine
One of the most common causes of knocking during spinning is incorrect installation of the washing machine. If the machine is standing unevenly, it can lead to an imbalance of the drum, which causes noise.
How to recognize:
- Strong vibration of the machine during spinning.
- Knock occurs only at high revs.
- The machine may move slightly on the floor.
Solution:
- Check if the machine is level using a level. If necessary, adjust the legs of the machine so that it stands stably.
2. Worn shock absorbers
Shock absorbers are responsible for dampening the vibrations of the drum during machine operation. If they are worn or damaged, the drum may knock against the body, especially when spinning at high speeds.
How to recognize:
- The noise intensifies at the maximum spinning speed.
- The machine seems less stable during operation.
- Externally, shock absorbers may look worn or damaged.
Solution:
- Replace worn shock absorbers. This requires dismantling the machine and may require the help of a specialist.
3. Bearing problems
Bearings play a key role in the smooth operation of the drum. If they are worn, you may hear a knock or even a grinding noise during the spin cycle. Bearing wear is a serious problem that cannot be ignored.
How to recognize:
- The noise resembles a metallic screech or a dull thump.
- The knock increases with increasing revolutions.
- The drum may rotate with difficulty or with extraneous sounds.
Solution:
- Replacing bearings requires a professional approach. It is better to contact a specialist who can perform this difficult job.
4. Objects in the drum or outside the ego
Sometimes the knocking can be caused by small objects such as coins, buttons or other foreign objects that have fallen into or outside the drum. They can cause noise when in contact with the drum during rotation.
How to recognize:
- Knocking occurs not always, but periodically.
- The noise may vary depending on the load on the drum.
- After completing the wash, you can find small objects in the drum or filter.
Solution:
- Check the drum and filter for foreign objects. Remove anything that may cause noise.
5. Rebalancing of the drum
If the washing machine is overloaded or unevenly loaded, the drum may become unbalanced, which will lead to knocking during spinning. This is especially relevant for machines with a large drum volume.
How to recognize:
- Strong vibration and knocking during squeezing.
- The machine can move on the floor.
- The knock disappears when the spin speed is reduced.
Solution:
- Make sure the load is evenly distributed and avoid overloading the machine. In some models, it is possible to activate the drum balancing mode.
Conclusion
Knocking during the spin of the Samsung washing machine can be caused by various reasons, from improper installation to serious mechanical malfunctions. In order to accurately determine the source of the problem and prevent further damage, it is recommended to carry out diagnostics and eliminate the cause of the knocking. If you need professional help in repairs, contact qualified specialists.
