The official representative of the manufacturer of the company “Bafalt Makina” (Turkey) offers high-quality equipment for asphalt works, production of modified bitumen, emulsion, mobile and stationary bitumen tanks, industrial heating systems, and other auxiliary equipment for road surface repair.
Thermal oil heater for bitumen tanks KYK-1000 (Combined burner) Bafalt, Turkey.
Provided with the following parameters:
The largest heat exchanger area among analogues.
Highest convection:
— The 20-30% pump is more productive than its counterparts.
— The lowest resistance due to the largest diameter of the coil pipes and the area of the filter element, which is 5 times larger than similar ones.
The most economical and efficient Baltur burner provides faster heating due to a powerful blowing fan and a nozzle that divides the flame into 4 torches, which gives a large area of the flame itself and distributes it more evenly along the contours of the oil register.
The design of the oil register - the coil is double-circuit. According to the principle of the “Russian stove”, the heated air passes 3 times between the two coils and enters the chimney slightly warm.
The thickness of the insulation is 100 mm.
Security
Low coolant pressure in the system (0.5-4 Bar) makes the system as safe as possible. Pressure control is carried out by both digital pressure gauges and redundant dial gauges in case of power failure. The coolant temperature is controlled at the inlet and outlet.
The best explosion protection for the combustion chamber is provided by an emergency pressure relief valve.
The emergency automatic shutdown system is equipped with a siren.
Highly reliable European components from Siemens, Schneider Electric.
The coil pipes are made of seamless pipe.
Low operating costs
The oil filter needs to be serviced many times less often than competitors, as the filter element area is many times larger. The oil retains its operational properties longer.
Simplicity and ease of maintenance, due to design and technological solutions.
The design of the oil register ensures free and uniform circulation of gases, excluding the formation of clogging soot due to the large gap between the combustion chamber wall and the outer and inner contours of the coil.
Technical specifications:
Model KYK-1000
Fuel type: combined – gas/liquid fuel
Heat flow capacity 1,000,000 kcal/h
Combustion chamber capacity (l) 930
Coil capacity (l) 490
Coil pipe length, Inner part (m) 66.7
Coil pipe length, Outer part (m) 90.1
Total length of the coil (m) 156.8
Nominal diameter (DN) 2.5″ – DN 65
Two-stage progressive gas burner, Type Baltur TBML 120 MS
Two-stage progressive gas burner, Power 250…1200 kW
Insulation thickness (mm) 100
Insulation density (kg/m³) 80 80
Working pressure (bar) 0.5 – 4
Operating temperature (°C) 250 – 300
Dimensions – Without burner (W x D x H) 2100 x 3460 x 2370
Dimensions – Including burner (W x D x H) 2100 x 4380 x 2370
Power supply 380 V – 3 phases – 50 Hz
Weight (kg) 3400
Oil pump motor power (kW) 15.0
Power consumed by other consumers of the automation system (kW) 3.0
Total power (kW) 18.0
Oil pump capacity, l/s (m3/h) 22.22 (80)
Expansion tank (l) 690
24 month warranty.
You must Register or Login to post a comment