Share:

The Nano-Light 40 neodymium laser for tattoo removal from MedicaLaser is a new laser model.

The laser is intended for removing tattoos and permanent makeup, as well as for performing procedures for the treatment of onychomycosis and carbon peeling procedures. 

This model of neodymium laser is equipped with a pilot beam device, and also operates with an increased flash frequency per second – up to 10. The flash resource of this device is up to 10,000,000 pulses. 

AXON 8800-16000 mAh uninterruptible power supply for router

👉 More about AXON UPS with manual quality control

The Nano-Light 40 laser is equipped with three nozzles, which gives the neodymium laser the following capabilities: 

  1. The 1064 nm wavelength attachment is designed to target and remove black and blue pigment – removing non-color tattoos and pigmented makeup. 
  2. The 532 nm wavelength attachment affects the colored pigment – removing colored tattoos.
  3. “Carbon” attachment for carbon peeling procedure.

The laser is easy to operate, the laser menu interface is convenient and clear, which simplifies and speeds up the learning of the rules for handling the device.

The very compact body of the device allows it to be placed in a room of any size and harmoniously fit into the interior of the cosmetologist's office. 

Types of procedures performed on the Nano-Light 40 device: 

  • tattoo removal (color and black and white);
  • removal of permanent makeup (eyebrows, arrows, lips);
  • pigmentation removal;
  • treatment of nail fungus (onychomycosis);
  • carbon peeling.

Basic equipment of the device: main module (device body), manipulator, power cable, foot switch, master's glasses, client's glasses, 1064 nm, 532 nm nozzles, “Carbon” nozzle, water filling system.

Advantages of the Nano-Light 40 device: 

  • approximate payback period – 1 month;
  • convenient and easy to use;
  • does not require consumables;
  • modern cooling system;
  • does not leave scars or marks;
  • long service life (2-3 years without lamp replacement);
  • high efficiency of the procedures performed.

Additional information about laser carbon peeling.

Laser carbon peeling is an innovative scientific development that consists of the complex effects of laser and photorejuvenation.

The procedure is performed using a neodymium laser using carbon nanogel Carbon Peel (Carbon gel for carbon laser external use only). 

The laser carbon peeling procedure takes about 30-40 minutes. 

There is no rehabilitation period. There may be slight redness, which disappears within a few hours. Changes are visible immediately after the procedure, and the effect increases over time. 

Effects after laser carbon peeling: 

  • narrowing of skin pores;
  • bactericidal effect on the skin;
  • exfoliation of the epidermis;
  • activation of cell regeneration in the deep layers of the skin;
  • synthesis of collagen and elastic fibers;
  • destruction of pathogenic microflora;
  • normalization of skin lipid balance;
  • improvement and evenness of skin color;
  • smoothing fine wrinkles.

The device can be supplied in two versions:

Kit Option A – without shelf (see photo of the device). Option B of the set – with shelf (see photo of the device).