DATAKOM DKG-175 DIN-RAIL MOUNTED ATS CONTROLLER WITHOUT DC POWER SUPPLY
The DATAKOM DKG-175 model is a DIN-rail ATS controller that does not require DC power.
The device monitors the voltage of the 3-phase network, sends a remote start command to the generator set, and switches both the generator and the network contactors.
The device is microprocessor controlled and offers flexibility of use thanks to customizable parameters.
LEDs on the front panel provide information about the presence of the mains and generator, as well as the location of the contactors.
TEST mode allows you to test the generator when there is a network.
FEATURES:• DIN rail mounting• No DC power source required• Microprocessor controlled• Adjustable parameters• MCB and GCB 10A/250VAC outputs• Remote start output 10A/28VDC/250VAC• Isolated mains and generator inputs• TEST mode available
TECHNICAL SPECIFICATIONS:Generator voltage: 170-300 V-AC (phase-neutral)Mains voltage: 170-300 V AC, adjustable (phase-neutral)Mains frequency: 30 – 70 Hz, adjustableGenerator contactor timer: 1 – 40 sec. configurableMains contactor timer: 0 – 999 seconds configurableMains standby timer: 0 – 999 seconds configurableMains failure timer: 0 – 999 seconds configurableRecharge timer: 0 – 999 seconds configurableRemote start delay: 0 – 999 seconds configurableMains contactor output: 10 A @ 250 VACGenerator contactor output: 10 A @ 250V-ACRemote start output: 10 A @ 250 V-AC/28V-DCOperating temperature: -30°C to 70°CStorage temperature: -30°C to 80°CMaximum humidity: 95% non-condensing.Dimensions: 70x115x66 mm (WxHxD)Weight: 180 g (approx.)Mounting: DIN rail.Housing material: high temperature, flame retardant ABS/PCIP protection: IP20The device complies with EU directives-2006/95/EC (low voltage)-2004/108/EC (EMC)Reference standards:EN 61010 (safety requirements)EN 61326 (EMC requirements)
You must Register or Login to post a comment