DATAKOM D-300-MK3 is a cost-effective generator set controller with modern technology, ready for online monitoring. Its main advantages are multifunctionality, support for multiple topologies, harmonic analysis and detailed power measurements. The software features are complemented by easy firmware updates via USB port. The Windows-based PC software allows monitoring and programming via USB, RS-232 and GPRS. The Rainbow Scada web service allows you to monitor and control an unlimited number of generator sets from one central location.
Functionalities:• AMF unit• OPS unit• Remote start controller• Manual start controller• Engine controller• Remote display panel
Communications:• 4-band GPRS modem (optional)• USB device• RS-232 (2400-57600 baud)• J1939-CANBUS• Geolocation via GSM• GPS support (RS-232)• Central Internet monitoring• Sending SMS messages• Sending e-mail• Free PC software: Rainbow Plus• Modbus RTU
Features:• Diesel and gas generator support• 400Hz operation support• 400 event logs, full snapshot• All front panel parameters can be edited• 3-level configuration password• 128×64 graphic LCD display• Downloadable languages• V & I waveform display• V & I harmonic analysis• MCB and GCB 16A outputs• 8 configurable digital inputs• 6 configurable digital outputs• 3 configurable analog inputs• CANBUS-J1939 and MPU• 3 configurable service alarms• Multiple automatic simulator• Weekly operation schedule• Dual mutual redundancy with equal aging of gensets• Manual «fine speed control» on selected ECUs• Automatic fuel pump control• Shutdown protection function• Overpower protection• Back-feed protection• IDMT protection overload protection• Load shedding, dummy load• Multiple load control• Current imbalance protection• Voltage imbalance protection• Fuel filling and theft alarm• Real-time battery clock• Idle control• Battery charging enabled• Battle mode support• Multiple rating conditions• Contactor and MCB drive• 4-quadrant genset power meters• Grid meters• Fuel filling meter• Fuel consumption meter• Modem diagnostic display• Configurable via USB, RS-232 and GPRS• Free configuration program• Allows SMS control• Central monitoring ready• Mobile genset support• GSM automatic geolocation• GPS connectivity (RS232)• Easy USB firmware upgrade• IP65 rated with additional gasket
TECHNICAL SPECIFICATIONS:DC power supply range: 9.0 to 33.0 V DC.DC current consumption: - 250 mA-DC typical at 12V-DC - 125 mA-DC typical at 24V-DC - 500 mA-DC max. at 12 V DC - 250 mA-DC max. at 24 V DC Generator voltage: 0 to 330 V-AC (Ph-N), 0 to 570 V Ph-Ph Generator frequency: 0-500 Hz. Mains voltage: 0 to 330 V-AC (Ph-N), 0 to 570 V Ph-Ph Mains frequency: 0-500 Hz. Current inputs: from current transformers. ../5A.CT range: 5/5A to 5000/5AVT range: 0.1/1 to 6500/1KW range: 0.1 kW to 65,000 kWAccuracy:- Voltage: 0.5%+1 digit- Current: 0.5%+1 digit- Frequency: 0.5%+1 digit- Power (kW, kVAr): 1.0%+2 digits- Power factor: 0.5 %+1 digitDigital inputs: input voltage from 0 to 36 V DC.Analog input range: 0-5000 Ohm.Mains and generator contactor outputs: 16 A at 250 VDC outputs: protected MOSFET semiconductor outputs, nominal 1A @ 28VDC Scrolling Cases: Withstands 0V for 100ms. Magnetic Sensor Voltage: 0.5 to 30V-RMS. Magnetic Sensing Frequency: 10 to 10000Hz. Charge Generator Drive: 100mA @ 12VDC, 200mA @ 24VDC USB Device: USB 2.0 Full Speed RS-232 Port: Selectable Data Rate Operating Temperature: -20°C to 70°C (-4 to +158°F). Storage Temperature: -40°C to 80°C (-40 to +176°F). Maximum Humidity: 95% non-condensing. IP Protection: IP54 from front, IP30 from rear. Dimensions: 172 x 134 x 47 mm (W x H x D) Panel cutout dimensions: minimum 151 x 111 mm. Weight: 300 g (approx.) Housing material: high temperature, flame retardant, ABS/PC, ROHS compliant Mounting: Flush mounting with rear fixing plastic brackets. EU Directives compliance: -2006/95/EC (Low Voltage) -2004/108/EC (Electromagnetic Compatibility) Reference standards: -EN 61010 (Safety requirements) -EN 61326 (EMC requirements) UL compliance: UL 6200, Controls for stationary motor-driven units (Certificate number – 20140725-E314374) CSA compliance: CAN/CSA C22.2 No. 14-2005 – Industrial Control Equipment
You must Register or Login to post a comment