Share:

The DATAKOM DKG-110 is a low-cost, microprocessor-controlled motor protection unit designed for use in hand-held generator sets as a safety shutdown device. This device mounts on a standard DIN rail inside the generator control panel.

The device offers basic protection functions for the generator, such as high engine temperature, low engine oil pressure, and generator overspeed/underspeed.

Each LED alarm has a separate semiconductor output, allowing the use of remote visual alarm lights. The device has the parameters "Energy to Stop" and 60 Hz, selected at the manufacturing stage. The device has different models for 12 and 24 volt power plants.

AXON 8800-16000 mAh uninterruptible power supply for router

👉 More about AXON UPS with manual quality control

It offers basic protection functions for the generator set, such as high engine temperature, low engine oil pressure, and generator over/underspeed.

The limit for the correct generator frequency is 30 to 57 Hz. A 3 second delay is provided for high current start-up.

The Safety On signal is received from the alternator voltage input.

The device is usually turned on using the start/stop button on the control panel. It powers the engine fuel solenoid. When powered on, the power indicator is constantly on. When the protection is active, the LED will flash.

The device is available in a DIN rail mounting package with standard dimensions of 36x116x60 mm.

• DIN rail mounted• Low cost• Fuel and alarm relay outputs• 3 solid state lamp outputs• Generator input voltage• Withstands start-up cut-off• Standard dimensions, 36 mm width• Plug-in connection system for easy replacement.

TECHNICAL SPECIFICATIONS:Step control: 8-bit microcontroller.Generator voltage: 50 to 277 VAC (Ph-N)Generator frequency: 20 to 100 Hz.DC power supply range: 9-18 VDC (12 V models) 18 to 33 VDC (24 V models)Current consumption: 80 mA-DC typical (no alarm) 120 mA-DC max. (outputs open)Total DC output current: 10A-DC.Max. Current for each relay output: 10A.Max. Current for each alarm output: 250 mA. Operating temperature: -10C (14F) to 60C (140F). Storage temperature: -20C (-4F) to 80C (176F). Maximum humidity: 95% non-condensing. Dimensions: 36 x 116 x 60 mm (W x H x D) Weight: 90 g (approx.) Conformity (EU directives) - 73/23/EEC and 93/68/EEC (low voltage) - 89/336/EEC, 92/31/EEC and 93/68/EEC (electromagnetic compatibility) Reference standards: EN 61010 (safety requirements) EN 50081-2 (EMC requirements) EN 50082-2 (EMC requirements)