DATAKOM D-700-TFT-SYNC+EXT Generator control and synchronization controller. The extended version of DATAKOM D-700-TFT-SYNC+GSM is a new generation synchronizing generator controller that combines multifunctionality and extensive communication capabilities with a reliable and inexpensive design. The device offers the ability to teach an automatic generator, for the first time in the industry. The device's multifunctionality allows it to be a generator or a network synchronizer, even parallel with a network controller with soft transfer in both directions.
COMMUNICATION:Color TFT displayEthernet port (10/100 Mb)GSM-GPRSInternal GPRS modemBuilt-in web serverWeb monitoringWeb programmingCentral monitoring via the InternetModbus RTU via RS-485Sending SMS messagesSending e-mailFree PC software: Rainbow PlusFree central monitoring (2 years)Modbus TCP/IPSNMPUSB hostUSB deviceRS-485 port, adjustable baud rateRS-232Micro SD card slotJ1939-CANBUS
FUNCTIONALITIES:Multiple generator synchronization and load sharingNetwork synchronizationSingle generator set in parallel with the gridAMF unit with uninterrupted transmissionOPR unit with uninterrupted transmissionRemote start controllerManual start controllerEngine controllerRemote display and control unit
TOPOLOGIES:3 phase 4 wire, star3 phase 4 wire, delta3 phase 3 wire, delta, 3 CT3 phase 3 wire, delta, 2 CT (L1-L2)3 phase 3 wire, delta, 2 CT (L1-L3)2 phase 3 wire, L1-L22 phase 3 wire, L1-L31 phase 2 wire
TECHNICAL SPECIFICATIONS:Generator voltage: 0 to 300 V-AC (Ph-N)Generator frequency: 0-600 Hz.Mains voltage (bus): 0 to 300 V-AC (Ph-N)Mains frequency (busbar): 0-600 Hz.Topology: 1-2-3 phases, with or without neutralDC supply range: 8.0 to 36.0 V DC.DC current consumption: - 300 mA-DC typical at 12V-DC - 150 mA-DC typical at 24V-DC - 600 mA-DC max. at 12 V DC - 300 mA-DC max. at 24 V DCV-A-cos Accuracy: 0.5% + 1 digitKW-kVA-kVAR Accuracy: 1.0% + 1 digitCT range: 5/5A to 5000/5AVT range: 0.1/1 to 6500/1KW range: 0.1 kW to 65,000 kWCurrent inputs: from current transformers. ../5A.Digital inputs: input voltage from 0 to 36 V DC.Analog input range: 0-5000 Ohm.Digital outputs: protected MOSFET semiconductor outputs, rated 1 A at 28 V DC.Scrolling events: withstands 0 V for 100 ms.Magnetic sensor voltage: from 0.5 to 30 V AC.Magnetic sensing frequency: from 0 to 10000 Hz.GOV control output: 0-10V-DC.AVR control output: ±3V-DC, fully isolated.Charger generator excitation: 2 W.Display screen:- B/W versions: 2.9”, 128×64 pixels- TFT versions: 4.3”, 480×272 pixelsEthernet port: 10/100 MbpsUSB Device: USB 2.0 Full SpeedUSB Host: USB 2.0 Full SpeedRS-485 Port: Selectable baud rateRS-232 Port: Selectable baud rateData Link Port: Fully Isolated CANBUSOperating Temperature: -20°C to 70°C (-4 to +158°F)Storage Temperature: -40°C to 80°C (-40 to +176°F)Maximum Humidity: 95% non-condensing.IP Protection: IP54 from front panel, IP30 from rear panel.Dimensions: 243 x 183 x 47 mm (W x H x D)Panel Cutout: Minimum 216 x 156 mm.Weight: 700 g (approx.)Body Material: High Temperature, Flame Retardant ABS/PCMounting: Front panel is attached to using plastic brackets. Compliance with EU directives: - 2006/95/EC (low voltage) - 2004/108/EC (electromagnetic compatibility) Reference standards: - EN 61010 (safety requirements) - EN 61326 (EMC requirements) UL/CSA compliance: - UL 6200, Controls for stationary engine-driven units (Certificate No. - 20140725-E314374) CSA compliance: - CAN/CSA C22.2 No. 14-13 - Industrial control equipment
You must Register or Login to post a comment