Share:

Liquid separator with a volume of 4 liters. Solder connections - 28.7 mm (1 1/8″) The function of liquid separators is to prevent refrigerant or oil in liquid form from entering the compressor. The liquid separator passes the required amount of refrigerant and oil in gaseous form into the compressor. Before installing the liquid separator, the system must be filled with oil, taking into account that the liquid separator can also collect oil. The difference between the liquid separators of the LTAG series and the LTG series is that in the LTAG series there is a serpentine tube inside, which you can weld into from the side of the pressure line in order to convert heat from the side of the pressure line in order to increase the power of the liquid separator and the refrigerant will enter the compressor in the gaseous phase, because of this the compressor will work easier and better.