Share:

Staple pressing device Master 130.PS

For mechanical connection of conveyor belts using universal detachable connectors UM1000.11, UM1400.13, UM1750.15 of all modifications. The kit includes a 1.5 kg hammer. A belt cutter (SKL20 groove cutter), a square with a groove for cutting the belt at a right angle L=1200, a conveyor belt knife - ordered separately. Universal device Master 130.PS for pressing mechanical connectors UM1750.15 ROZUM connectors are designed for joining conveyor belts with a strength of up to 1750 N/mm Simple and quick installation using a hammer and a special driving device Master 130.PS Areas of application of detachable mechanical connectors UM1750.15: transportation of coal, crushed stone, ore, rock and other concrete plants quarry Type of conveyor belt connected by connectors UM1750.15: rubber-fabric multi-layer or monocord Maximum strength of the connected belt: up to 1750 N/mm Minimum recommended diameter of the drive drum: from 350 mm Detachable connectors Master 10/14 are available in the following types: UM1000.11 for belts with a strength of up to 1000 N/mm UM1400.13 for belts with a strength of up to 1400 N/mm UM1750.15 for belts with a strength of up to 1750 N/mm Detachable mechanical connectors UM1750.15 are pressed into the end of the conveyor belt using a special driving device Master 130.PS, after which both parts of the joint are connected according to the "zipper-lock" principle, a connecting rod Master is inserted into the loops. The connecting rod Master is a piece of rope of a special design, the length of which depends on the width of the connected conveyor belt. Length of the connecting rod Master, mm 785, 985, 1185, 1385, 1585. Mechanical connectors UM1750.15 and their modifications are supplied in a set for the width of the connected conveyor belt 1000 mm or in a plastic container for 3000 mm of the joint. When joining the belt, detachable connectors UM1750.15 can be assembled for any larger or smaller belt width. *Complete sets of connectors UM1750.15 for joining a belt of a certain width are available on request. Advantages of mechanical detachable connectors UM1750.15 and their modifications: when preparing for joining the belt, the technology is simplified, the belt linings do not peel off, simple cutting of the belt at a right angle; conveyor belt economy – joint-to-joint connection, the flexibility of the resulting joint is almost the same as that of a solid belt, which does not create tension when the belt passes through the drums; a belt of the same thickness throughout will not complicate the passage of cleaning devices; dismantling and installation of the belt web in any place is simplified; the proportion of manual labor (mechanization of work) is reduced due to the use of tools.