Share:

Generators with American CUMMINS engines, economical and with a long engine life.

The manufacturer's representative offers minimum prices and convenient terms of equipment supply.

The generators have a heater that will help use the generator in winter and simplify cold starts. (If the customer needs, it is possible to install a WEBASTO heater, which will greatly facilitate starting the generator at temperatures below 0*C)

Because the generator constantly recharges the battery, you won't have to worry about it draining.

Warranty service of the diesel generator is 2 years or 2000 operating hours, whichever comes first (provided by qualified specialists).

Professional engineering and technical staff with 10 years of work experience.

Service center in Kyiv.

Delivery throughout the territory of Ukraine (except temporarily occupied).

CUMMINS DIESEL GENERATOR CUMMINS C 20D (25kVa) in a casing, 20 kW

Purpose and mode of operation – To act as a backup power source and ensure continuous operation 24 hours a day.

Equipment – Diesel power plant on a frame in a casing for stationary installation;

– Rechargeable battery with cables and terminals;

– Lubricating/technical fluids for the first start-up and one replacement;

Nominal power (kW) 20

Maximum power (kW) 22

Permissible overload 110% – for 1 hour

Capacity (kVA) 25

Related speed (rpm) 1500

Related voltage (V) 400 (380)

Rated current (A) 38

Related frequency (Hz) 50

Nominal Power Utilization Factor 0.8

Phase 3

Reference weight (kg) 1200

Reference dimensions (L x W x H) 2250X1100X1605 (mm)

Noise level, dB 70

Main technical characteristics of the power plant:

– Automatic engine stop when the control parameters reach the limit values.

– Automatic voltage regulator.

– Frequency, voltage and current control.

– Correct sine wave at the output.

– Electronic microprocessor control panel.

– Hour meter.

– Emergency stop button.

– Remote monitoring and equipment management.

– Automatic coolant heating.

– Battery charging in standby mode.

– Control panel interface language – Ukrainian

Engine model Cummins 4B.3-G2

Engine related power (kW) 24

Engine power in backup mode (kW)27

4 stroke engine

Volume (l) 3.9

Compression ratio 18.0:1

Starting method Electric starter, automatic transmission

Speed control: ^5%

EURO 4 environmental standard

Speed mode – Electronic speed control

Fuel consumption at 75%-100% load, l/h – 5.2-7.5

Fuel consumption at 75%-100% load, l/kW – 0.34-0.38

Operating time under load 75% – 16 hours

Fuel system model BYC A/Electronic speed controller

Fuel tank capacity (l) 90

Fuel tank dimensions (mm) 2250X1100X235

Cooling method – Closed water cooling

Oil system capacity (l) 10.9

Cooling system capacity 7.2 l

Engine reference weight (kg) 321

AC generator model – STRUM

Rated voltage (V) 380

Rated frequency (Hz) 50

Rated speed (rpm) 1500

Power utilization factor 0.8

Phase and Wiring – Three Phase, Y-Configuration

Efficiency (%) 95.19

Excitation method – Brushless excitation

 Insulation class – H

Protection level - IP23

Alternator reference weight (kg) 280

Monitoring operating parameters

Coolant temperatures

Fuel level sensor

Oil level – visual (dipstick)./sensor

Minimum ambient temperature, 0C -35

Maximum ambient temperature, 0C +50

The need to perform in a noise-proof all-weather casing

and requirements for it – Execution in a noise-proof all-weather casing (metal parts are electrostatically coated and painted with resistant paint that prevents corrosion during the specified service life; presence of thermal insulation of the exhaust system)

Noise reduction equipment – Industrial silencer

Requirements for filling with working fluids – The product is supplied filled with oil and coolant designed for ambient temperatures from -35°C to +50°C.

Warranty obligations:

Warranty – 24 months or 2000 operating hours.

– The warranty period of operation of the diesel power plant is 24 months.

– Battery warranty period is 24 months.

Additional services:

– Commissioning and commissioning works

– Training of the Customer’s service personnel