GSM repeater set, communication amplifier 900/1800/2100 MHz RETAIL | Ads Kyiv

Retail price!!!

A GSM repeater is a device designed to solve 2 problems at once: strengthening the mobile signal and wireless 3g/4g Internet. The main purpose of the accessory is to amplify a weak signal or retransmit coverage from the street into the room. The repeater has a universal purpose, as it is compatible with any mobile operator that works in the GSM standard, in Ukraine it is Kyiv star, Vodafone and Lifecell. This model is intended for indoor use and has a display that shows the operation of the frequencies. The device is equipped with a system of protection against interference and automatic gain adjustment.

A repeater will be needed in the following cases:
No signal in offices located in basements;
The mobile covering in the warehouse or workshop is blocked due to dense or reinforced concrete walls.
Poor connection near many high buildings that block the pavement.
Remoteness of the base station of the mobile operator (in this case, the repeater must be used with a special antenna)
The deterioration of the coverage is associated with the landscape features of the area
Installation and configuration
The operation of the device is ensured by an electrical network - 220V, the power supply unit is included in the set for each device. For full and correct operation of the repeater, it is necessary to connect 2 antennas to it (internal and external). The purpose of the internal antenna is to distribute the signal indoors, while the main mission of the external antenna is to amplify or relay the signal from the street. If everything is simple with the internal antenna, it is enough to place it in the room you need, then as a rule, problems arise with the external one. But in the case of this model of the repeater, you will not have any difficulties with the setting! Thanks to the display, you can see the gain of each operating frequency. Therefore, it is quite simple to point the external antenna in different directions until you find sufficient frequency amplification, based on the display indicators.