Share:
4.6/5 - (1096 votes)

Beko washing machines are a technology that has won the trust of many consumers due to their reliability, ease of use and high energy efficiency. However, like any household appliance, these washing machines can break down over time. One of the most common problems that Beko washing machine owners face is a failure of the heater, or TEN (tubular electric heater).

This component determines the machine's ability to heat water to the required temperature for effective washing. If the heating element breaks, you will either have to call a technician or, if you have certain skills, replace it yourself. Washing machine repair specialists Beko service note that regular maintenance of your washing machine can significantly extend its service life. In this article, we will look at why heating elements can fail and how to properly replace them.

Causes of heating element failure in Beko washing machines

 

There are several factors that can cause the heating element in a Beko washing machine to fail. Understanding these reasons will help you not only replace the broken part, but also avoid similar problems in the future.

  1. Scale buildup. The most common cause of heater failure is scale buildup on the surface of the heater. If your water is hard, the calcium and magnesium content in the water can cause scale to build up on the heater over time. This not only reduces heating efficiency, but can also cause the heater to overheat and burn out.
  2. Overheating due to machine overload. Frequent overloading of the washing machine with a large amount of laundry creates excessive load on all components of the machine, including the heating element. As a result, the element can overheat, leading to its wear or damage.
  3. Clogging of filters and tubes. If the filters or tubes in the machine become clogged, this can lead to improper water circulation, which can also negatively affect the operation of the heating element. If there is insufficient water flow to the heater, it will operate with overload, which in turn can lead to its breakdown.
  4. Faulty thermostat. The thermostat is responsible for controlling the water temperature in the washing machine. If the thermostat is not working correctly, it can send incorrect signals to the heating element, and it will not be able to maintain the desired temperature, which can also lead to its failure.
  5. Mechanical damage. The heating element can be damaged due to mechanical impact - for example, during transportation or improper installation. This can lead to cracks, leaks or complete failure.

Signs of a heater malfunction

If you suspect that the heating element in your Beko washing machine has failed, there are several signs to look out for:

  • The water does not heat up. If the washing machine does not heat the water to the desired temperature, this is one of the main signals that the heating element is faulty.
  • Unusual noises. If you hear strange sounds, such as crackling or humming, while the machine is running, this may indicate a problem with the heater.
  • Stopping the wash during the heating phase. If the washing machine stops during the heating stage or does not proceed to the next washing stages, the problem may be in the heating element.
  • The appliance does not turn on or does not work on certain programs. Problems with water heating can cause the washing machine to not work properly.

Can I replace the heating element myself?

Many users wonder if it is possible to replace the heating element themselves. Fortunately, this process is not very complicated and does not require special skills. However, before starting the replacement, it is important to consider several factors:

  1. Security. Before starting any work, make sure that the washing machine is disconnected from the electrical and water supplies.
  2. Correct diagnosis. To be sure that the problem is with the heating element, use a multimeter to check it for a short circuit or burnout. If the heating element does not pass current, it must be replaced.
  3. Availability of spare parts. To replace the heating element, you should purchase the exact model that fits your Beko washing machine. This is important because each heating element has its own characteristics and dimensions.

Step-by-step instructions for replacing the heating element

Heater malfunctions in Beko washing machines: how to replace the heating element yourself 2

 

  1. Turn off the washing machine. Disconnect it from the electrical network and turn off the water supply.
  2. Remove the back or front panel. To access the heater, you will need to remove one of the machine's panels, depending on the model. In most cases, the heater can be accessed through the back.
  3. Find the TEN. The heating element is usually located at the bottom of the tank. It looks like a metal tube with two contacts.
  4. Disconnect the wires from the heating element. Carefully remove the wires from the heater contacts.
  5. Unscrew the heater. Using a screwdriver, unscrew the heater mountings. These may be screws or other fasteners, depending on the model.
  6. Install a new heating element. Install the new heater, secure it, and turn on the wires.
  7. Check the work. After completing the installation of the new heating element, turn on the washing machine and check if the heating is working.

Tips for caring for a heating pad

  1. Descale the machine regularly. Use special products to clean the washing machine from scale.
  2. Soften the water. Use water softeners to prevent scale formation on heating elements.
  3. Machine overload. Avoid overloading the washing machine as this can cause the heating element to overheat.

Conclusion

You can replace the heating element in a Beko washing machine yourself, but for this you need to follow the instructions and take care of safety. If you doubt your abilities or do not want to take risks, contacting professionals from the beko-service.com.ua service will always be the best option.