Used Automatic Vibropressing Line Poyatos Prima L from BSU (Spain)

USED Automatic vibropressing line Poyatos Prima L from BSU (Spain). Not been in operation, new.

The offer consists of the following components:

Automatic vibropressing line Prima L,

Maximum productivity:

Colorless paving slabs "brick" 10*20*6 cm - 100 m2 per hour (up to 800 m2 per 8-hour shift)

Colored brick tiles up to 80 m2 per hour, up to 650 m2 per shift.

Hollow block 40*20*20 cm – up to 7500 pieces per shift.

Equipment for inserting polystyrene panels into a hollow block (manual)

Equipment: press for splitting hollow blocks E600 (2 knives, height up to 230 mm, width 600 mm) – production of «old» blocks.

BSU for line, main and color layer.

Set of 6 molds – 3 paving slabs, 2 hollow blocks, 1 for curb.

Set of spare parts for the line.

Working pallets 1000 pcs. (1080 * 560 * 40 mm)

______________________________________________________________________________________________________________________________________________________

Technical parameters of the equipment:

Vibropress model Prima:

Conveyors and elevators:

Pallet feeder and conveyor from the press to the extractor and from the depressor.

Brush for cleaning pallets.

4-level lift with 2 pallets each.

4-level drainer with 2 pallets each.

Brush for removing chamfers from fresh products.

Manual bagger.

The supporting structure of the baler is 3*3*3 m, 4 columns.

Line control panel.

Electrical equipment.

Safety kit for vibropress according to EU standard.

The area for the vibrating press is 700 m2 plus space for the BSU (inside or outside the workshop).

Hopper for the front (color) layer.

Receiving hopper with level control sensor.

The junction box is connected to the hydraulics of the vibrating press.

Special automatic lifting system for the production of 60 mm high paving slabs with a colored layer.

Automation unit for synchronizing work with a vibrating press.

Stationary vibrating press Prima:

Size of technological pallets

Length 1080 mm

Width 560 mm

Height 40 mm

Hydraulic unit:

The unit is mounted on cushions on the chassis press.

The pump is mounted separately from the hydraulic unit.

Water cooling.

Vickers solenoid valves

Power 12 kW-1500 rpm.

Chassis support press:

Steel frame, welding, finishing, painted.

2 chrome-plated guide rods (maintenance-free).

4 columns for fastening and lifting the mold in operation.

Vibration block:

The bed, which provides vibration, is driven by two eccentrics.

Permanent oil lubrication (minimum maintenance, long service life).

Powered by one standard 7.5 kW motor.

The engine does not stop or accelerate, but only changes the speed of rotation (this avoids starting load).

At low speed, there is no vibration, so the engine always operates in economical mode.

During pressing, the technological pallet rests on a steel plate, which is easily replaced if necessary.

Electronic AC converter.

The mold is filled at a low frequency, and vibration is carried out at a high frequency with the ability to adjust the parameters.

Automatic dosing unit with hydraulic drive.

Replacement steel plate that moves the junction box.

The distribution drive provides high movement speed.

The loading is constantly monitored by a moving probe.

Vibrator power 48 kN.

BSU MF500 Turbo for the main layer.

Replacement blades have shock absorbers.

Unloading through a swinging hatch in the base

The base and side surfaces have an anti-abrasion treatment

Loading 500 liters/batch

Ready-mix concrete 330 liters/batch

Engine 18.7 KW

BSU service area (made by the buyer independently according to Poyatos drawings from concrete or metal)

TS140 cement feed auger (the buyer purchases the cement silo on site)

Cement scales BTD 250

Automatic water dispenser

Inclined belt conveyor